Shimano's M647s are bear trap-style bad boys perfect for BMX, downhill, dual-slalom, freeriding, even technical cross-country. They feature a combination of dual-sided, pop-up Shimano SPD bindings for quick and easy entry and grippy platforms that hold your feet firmly when you don't have time to clip in. Cleat tension is easily adjusted, and the chromoly axles and sealed-cartridge bearings ensure these sweet pedals hold up to the toughest of conditions and use. - Cleats included
PD-M820 FEATURE - Wider contact area - Thinner pedal body - 4 adjustable pins height on each platform BENEFIT - More stability in combination with AM shoes - Lower stack height and less chance of hitting the obstacles - Better grip when not stepped-in - Average weight: 546 g (w/o pins & washers) - 4 height adjustable pins 1.0mm cleat spacer included - Binding: Dual Sided - Cleat included: SM-SH51 - Optional cleat: SM-SH56 - Pedal Type: Off-Road/DH (SPD) - Reflector: SM-PD60
Shimano's Saint Flat Pedals are high-end power platforms with superior grip, beefy durability, and race-ready customizabilty. - Fore-aft concave - Virtual concave with 5 mm pins at edge and 4 mm pins at center - Superior grip for aggressive gravity riding - 105 mm x 109 mm wide platform for more stability and comfort - Newly designed slimmer axle saves weight without sacrificing the strength - 2 pin length options: long and short - 12 pins per platform - Weight: 553g
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
PD-MX70 FEATURE - Increased retention strength for the forceful pedaling of BMX racing. - Wide pedal-to-shoe contact area for more support and grip. - Lower platform and cage height for pedaling stability. - Integrated cage improves control when not clipped in and protects binding mechanism. - Adjustable entry and release tension settings. - Color: Black - Average weight: 414 g - Remarks: Higher retention force and narrower release angle than normal SPD pedals 1.0mm cleat spacer included - Binding: Dual Sided - Cleat included: SM-SH51 - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD) - Reflector: SM-PD60
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding.
PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65
PD-T421 FEATURE - CLICK'R binding on one side and flat pedal on the other - Customize the entry and release tension settings - Integrated reflector - Easier to catch the binding BENEFIT close - Versatile use - Longer life - Smart appearance - Weight: 418g - Easy entry and release - Better grip on flat side - Rider tune - Color: Black - Average weight: 418 g - Binding: Single Sided - Cleat included: SM-SH56 - Optional cleat: SM-SH51
Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams
The Comp Trail pedal features a low-profile body and burnished bearing surfaces. Its large platform provides an improved shoe contact interface for increased stability and control. New engagement system provides best-in-class entry and release and excellent mud-shedding characteristics. The revamped axle system offers even greater bearing life, and a wider body improves stability. - Body: Cast alloy - Axle Material: CroMo - Inner Bearing: Ball bearing - Outer Bearing: Ball bearing - Float: 4 degrees - Weight: 402g
The world-beating performance of the Echelon just got better, thanks to the addition of a high-strength carbon fiber body that drops this already lightweight pedal down to an incredible 220 grams a set. The WCS Echelon Carbon pedal offers a proven pedal design in a lightweight, reasonably-priced package. This Keo-compatible pedal features a combination of bushings and bearings for extremely long life, adjustable spring tension and a composite body and high-strength carbon claw, and a low-profile cleat/pedal interface for maximum pedaling efficiency. The pedal's lifespan is also increased thanks to a sealed cartridge outer bearing. A stainless steel cleat promises excellent wear and no noise. The Echelon Carbon also offers adjustable tension with extra-strong springs for powerful riders. Works with Ritchey or LOOK Keo cleats. - Body: Carbon thermoplastic - Axle Material: CroMo - Claw: Carbon reinforced thermoplastic - Inner Bearing: Bushing - Middle Bearing: Needle - Outer Bearing: Sealed Cartridge - Float: 7 degrees - Finish: UD matte carbon - Weight: 220g
• Thin platform, concave aluminum body with bottom loading pins. • Shorter spindle design shaves weight. • Thin concave platform • Reduced spindle length saves weight • Hex-head threaded pin design offers more bite for added security • Hidden / Grease access port for extended life • Platform size: 101x100cm • Cartridge bearings and DU bushings • 20 SHCS hex traction pins per pedal
• Low-profile, lightweight, wide aluminum body with double-concave platform. • Platform size: 101x114cm • 4 Full sealed cartridge bearings per pedal • Super thin double concave wide platform • Hex-head threaded pin design offers more bite for added security • Fore and aft angled bottom-loading pins • Hidden pin / Grease access port • 20 SHCS hex traction pins per pedal
$49.99 - $54.99
A new addition to the Race Face flat pedal line up: the Chester Pedal. This tough and burly nylon composite body provides a large platform with the same grip as traditional alloy pedals via the bottom loading 8 hex traction pins per side. Thin and lightweight is the name of the game with Chester, featuring a cro-mo axle that is fully sealed and a 100% serviceable bearing and bushing system. This pedal offers great performance for a wide range of riders at a price that leaves plenty of cash in pocket to spring for that round of bevies at your local watering hole after hammering out a day of hot laps with the crew. - Nylon composite body - Replaceable steel pins (8 per side) - Fully sealed - Serviceable - Smooth and durable sealed bearing and bushing system - Cro-mo axle - Thin and lightweight concave platform - Large platform with same grip as traditional pedals
- Fixie style straps that are compatible with most flat pedals - Provide the pulling power of straps with the easy release of clipless pedal system - Stiff, Wide straps do not need toe clips
- All aluminum cage and body pedal with pre-assembled strap system - Alternative to clipless pedals with easy in and out strap
The Grandstand pedal features a unique slim profile, a wide platform and a comfortable concave that feels exceptional as soon as you set foot on it. All of Odyssey's pro riders have been after them since the first samples came in. The pedal features a unique bearing configuration that allows a big spindle to be paired with a slim pedal body. The metal version includes 8 durable and replaceable steel pins per side. - 9/16” only
Odyssey's been making these pedals longer than you've been alive and no one does it better. The wide alloy body and cage put the kung fu grip on your waffles, and radiused outside corners offer better clearance, Clarence. Thread 'em on your classic cruiser or track whip, get yourself some snacks, and slay the dirt dragon with a Triple Trap attack!
$13.99 - $19.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
While staying true to the original Twisted PC’s style, the Twisted PRO offers a significantly larger body shape, slimmer height and more concave while still being built around a traditional loose-ball bearing configuration. Features: - High-strength Nylon composite - 12 oversize pins per side - Traditional loose ball bearings - Chromoly spindle - High-strength plastic composite - Wider & longer pedal body - Larger concave area - Slimmer profile Specs: - 9/16-inch spindle - 104mm Width - 98mm Length - 14.6 oz (pair)
Different rides call for different footwear, which is why MSW's CP-100 Platform and Clipless pedals accommodate any shoes you've got. On one side, you've got a stable, wide platform to accommodate street shoes, and on the other, you've got an SPD-style clipless pedal that accommodates your favorite mountain bike shoes. The spring tension on the clipless side is adjustable so you can customize how much pressure it takes to unclip. On the trail or on the pavement, the CP-100 is a versatile, stable platform.
Sometimes you wear mountain bike shoes; sometimes you wear sneakers. MSW's CP-200 Platform and Clipless Pedals have you covered, whatever your footwear. These versatile pedals feature a wide, stable platform on one side and an SPD-style clipless entry on the other. Adjustable spring tension on the clipless side lets you customize how much pressure it takes to unclip, while sealed bearings keep you spinning smoothly for endless miles. And, the pedals are rebuildable to further maximize their lifespan.
Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.
- Great for safely carrying bikes on rear-mount car racks, preventing damage to car or other bikes - Pedals fold up vertically, providing for easier bike storage - All alloy platform, usable on both sides. Includes reflectors
- Street platforms with one-piece alloy body - Great for use with soft-soled street shoes - Toe clips and straps required (single strap only)
- Same light alloy body found on the Sylvan Touring, but with more teeth on the cage for added grip
- Entry level Track pedals with light alloy body and cage - Toe clips and straps required
Look brings their decades of clipless pedal experience to mountain bikers with their S-Track Race pedals. These easy entry/exit pedals boast a lightweight, minimalist design. Plus, for a great feel, maximum pedaling efficiency and excellent control, they have large surface areas complemented by the included cleats that spread pressure over more of your shoe, and improve overall comfort, too. They also have an open design that sheds even the worst mud with ease and ensures that the entry/exit is always crisp, solid and secure. Plus, with their 15-degree release angle, it's easy to get out in a hurry. The S-Tracks have carbon bodies, sealed bearing and chromoly axles for excellent durability.
• Pedals feature a fully CNC machined platform out of 2014 T6 aluminium with anodized finish • The axle is made of high strength Cr-Mo, heat treated and plated • The platform is slightly concave in shape to give maximum support • Each pedal uses a norglide bushing and three cartridge bearings in a fully sealed chamber to give a long smooth life • Replaceable pins per pedal provide excellent traction and grip. (Titanium and hollow pins available)