Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Zipp Service Course Stem
$56.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp Vuka Alumina Base Bar
$81.00
Zipp’s Vuka Alumina Base Bars are crafted of sleek, polished, 6066 aluminum. They're stiff for power transfer and handling, and they weigh just 250 grams. The ends are angled up five degrees for confident climbing, sprinting, and braking. Internal cable routing and an extra-wide area for mounting aero extensions make for a clean set up to dial in your ideal position (extensions sold separately).
Xpedo XPR Cleat Set
$25.00
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°
Wolf Tooth Components Roadlink
$29.99
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Components Roadlink Direct Mount
$29.95
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details
Wheels Manufacturing Inc. 1-1/8-inch Headset Spacer Kit
$160.00
105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5
Wheels Manufacturing Inc. Aluminum Headset Spacer
$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$39.00
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$42.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$42.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30/PF30 Multi-Adapter Kit
$209.99
- 8 bikes worth of adapters for Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. - 65 piece kit includes 4 each Shimano and SRAM adapter sets, plus extra spacers for chainline adjustment and a puller for removing adapters - Includes: (8) Shimano adapter (24mm ID, Shimano right or left; SRAM right only), (4) SRAM-left adapter (22mm ID, Shimano right or left; SRAM right only), (4) SRAM-right adapter (24mm ID, Shimano right or left; SRAM right only), (12) 0.7mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 1.8mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 2.5mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (8) 1.0mm spacer - left (30mm ID, SRAM), (4) 2.5mm spacer - left (30mm ID, SRAM), (4) 5mm spacer - left (30mm ID, SRAM), (4) 10mm spacer - left (30mm ID, SRAM), (8) wave washer, (1) removal tool for pulling adapter out of BB
Wheels Manufacturing Inc. Ball Bearing Retainer
$6.75 - $17.50
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. Brass Brake Cable Housing Ferrules
$28.00
- Precision-machined brass brake cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 5mm ID for use with most braking cables - 50-count bottle
Wheels Manufacturing Inc. Cable Crimps: Bottle of 250
- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle
Wheels Manufacturing Inc. Derailleur Hanger 11
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 110
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 142
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 157
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 167
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws
Wheels Manufacturing Inc. Derailleur Hanger 17
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-17 measures 15.49mm between the 2 mounting holes (center to center) and 4.7mm between the 2 vertical plates.
Wheels Manufacturing Inc. Derailleur Hanger 176
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 199
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 239
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Socket Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 27
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 354
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Fuji part #D034 - Attaches to frame with (1) M4x8 Flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 38
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 394
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (2) M3x10 Flat head screws - Fasteners Included - Replaces: Giant Part # 370000012 Note: This hanger is not the same as our DROPOUT-167. There is no ridge that fits into the axle pocket. Compatible with the following Giant models: - Escape R 3 - 2018+ - Escape R Disc - 2020 - Escape RX 1 - 2018+ - Escape RX 2 - 2018+ - Escape RX 3 - 2018+
Wheels Manufacturing Inc. Derailleur Hanger 49
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 59
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 93
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 96
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Drivetrain Spacer Kit
$145.00
Comprehensive shop kit for bottom bracket and cassette/freewheel spacing need. 139 pieces in a durable plastic storage box. Kit includes: - (20) 1.0mm FW Spacers - (10) 1.5mm FW Spacers - (10) 2.0mm FW Spacers - (10) NCS-4.5mm Cassette Spacers - (10) SHIM-.3MM Spacers - (10) SHIM-.5MM Spacers - (8) 0.5mm 24mm ID Spacers - (8) 1.0mm 24mm ID Spacers - (8) 2.5mm 24mm ID Spacers - (4) BB30-CLIPs - (4) BB30/PF30 Wave Washers - (4) GXP Wave Washers - (4) .7mm Bottom Bracket Spacers - (4) 1.8mm Bottom Bracket Spacers - (9) 2.5mm Bottom Bracket Spacers - (8) 0.5mm 30mm ID Spacers - (8) 1.0mm 30mm ID Spacers
Wheels Manufacturing Inc. Pedal Washers
$10.75
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Wheels Manufacturing Inc. Wheels Growler Seat Binder Bolt
$11.99
- Machined aluminum ends with 50mm steel bolt
Wald 803 City Riser Bar
$12.98 - $19.99
This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
Velox Tressostar Cloth Handlebar Tape
$69.50
- Adhesive backed, 100% cotton, braided, reinforced edges
TruVativ Hussefelt Comp Riserbar
$35.00
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Power Spline Bottom Bracket
$29.99
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included
TruVativ Steel Chainring Bolt Set
$8.99
- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex
Thomson Elite Seatpost
$99.95
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Thomson Elite X2 Road Stem
$99.95 - $99.99
Thomson's Elite X2 Road Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X2 combines exceptional strength with light weight for a stiff stem and total control on all your rides. It has a two-bolt clamp design that's just as strong as four-bolt designs thanks to Thomson's interlocking interface and it also cuts down on the weight. Plus, the stem's low 36mm stack height gives you more options for customizing your position. And, thanks to their reversible graphics, your X2 looks great whether you run a positive or negative rise.
Surly Cassette Cog
$35.00
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.
Surly Cross Check Frame Replacement Dropout Screws
$10.00
Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm
Surly Track Cog
$30.00 - $35.00
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.
Surly Track Cog Lockring
$17.99
Surly Stainless Steel Track Lockring. - Fits all but Campagnolo, Miche or Phil Wood - 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact
Surly Truck Stop Handlebar
$65.00
Designed to combine what’s good about drop bars with the benefits of a riser, the Truck Stop Bar offers welcome relief to the road-weary traveler. Just like with a standard drop bar, you’ll have multiple hand positions at your disposal so you can stay comfortable and in control for the long haul down the Big Slab. And if it’s a more relaxed, upright riding position you’re after, 30mm of rise will get you there. So, if you’ve accidentally or intentionally cut your steer tube too short, here’s your chance at redemption. Also suitable for taller riders who’ve exhausted all other options for rise, it comes in three widths of 42, 45, and 48cm. Lightweight aluminum construction, CB radio not included. Specifications: - Material: Aluminum - Clamp Diameter: 31.8mm - Width: 42cm, 45cm, or 48cm - Rise: 30mm - Sweep Angle: 12 degrees - Color: E.D. coated black
Surly Tuggnut Chain Tensioner
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Supacaz Super Sticky Kush TruNeon
$39.99
Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. The TruNeon collection delivers the brightest and most vibrant colors to ever touch bar tape. - Super Sticky PU (top layer): Superior supple hand feel with long-lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock-absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Tackiest/best hand feel - Long-lasting PU tape - TruNeon: Super bright, exclusive colors 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes
Sunlite Adjustable Quill Stem
$24.99
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.
Sunlite Adjusting Barrel
$2.99
- Aluminum w/lock nut - 18mm long/6mm O.D.
Sunlite Alloy 350mm Seatpost
$19.99 - $23.99
• Forged aluminum • Integrated micro-adjust seat clamp
Sunlite Alloy Seat Clamp
$9.99
• Aluminum clamp with a chromoly bolt
Sunlite Alloy Seat Quick Release
$8.99
• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt
Sunlite Alloy Side Pull Brake Set (Rear)
$19.99
• Side pull design • Includes lever, caliper, cable and housing • Aluminum construction • 330 grams/set
Sunlite Alloy Sport Pedals
$19.99
- One-piece alloy body - Chromoly spindle - Toe clip compatible - Dual-sided design - 320g pair - 9/16-inch spindle
Sunlite Alloy Swedged MTB Handlebar
$15.99
• Lightweight aluminum construction • Back sweep: 6 degrees
Sunlite Aluminum Brake Cable Hanger
$9.99
- Replacement front cable hanger - Aluminum construction
Sunlite Aluminum Crankarm (Left)
$13.99 - $19.99
• Square taper interface • Only includes left crank
Sunlite Aluminum Low Profile Horizontal Square Crankarm (Left)
$19.99 - $20.99
- Horizontal square interface - Only includes left crank
Sunlite Aluminum Touring Handlebars
$34.99
Aluminum North Road style touring handlebar.
Page 1 of 45 Next page