Accessories

Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths

BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

This 7-piece adapter set is used to install 22mm and larger inside diameter sealed bearings into bottom brackets. Includes adapters for the most common bottom bracket bearings for Shimano outboard cup BBs (HollowTech II), SRAM GXP, Truvativ, FSA, PF30 and BB30 bottom bracket bearings. - Includes open bore drifts for 6805, 24x37, BB30, PressFit30, GXP and BB86 bearings - 10mm ID hole, for use with Wheels Manufacturing bearing press handles - Compatible with Wheels Mfg. PRESS-1 or PRESS-4 handles

Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red

An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors

• Made in U.S.A. (Maysville, KY) • Shallow baskets carry notebooks, boxes or other articles that lie flat • Dimensions: 18 x 13 x 6 inches; the basket tapers to 15.75 x 10.5 inches at the bottom • Extended handlebar clamps fit 7/8" and 1"diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables • Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs • 1392 has a Zinc plated finish and 1392GB has a Black Powder Coat Finish • Complete basket with fittings weighs 2.6 lbs.

The Giant Delivery basket is one of the most enduring and iconic products in Wald's catalog. Popular among messengers and paperboys (feel free to ask your father or grandfather about this noble profession), this basket is designed to carry large loads thanks to its stout legs, cargo bands, and heavy-duty handlebar clamps. - Made in U.S.A. (Maysville, KY) - Great for delivery, industrial bikes and hauling large loads - Reinforcement bands add extra strength - this basket is built for rugged use - Dimensions: 21 x 15 x 9 inches; the basket tapers to 18.25 x 12.25 at the bottom - Extended handlebar clamps allow greater clearance for shift and brake cables. They are 3 5/8" apart and fit 7/8", 1" and 31.8mm diameter handlebars - Legs extend from approx. 14 1/2 inches to 23 inches and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - 157B has a Zinc plated finish and 157GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.8 lbs.

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

- Steel wheels - For riders up to 100lbs - Fits 12" - 20" wheel bikes

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

Tri-Flow Citrus Cleaner/Degreaser provides a powerful foaming action that cuts through and cleans the toughest grease, dirt and oil. - Easy to use trigger allows user to lay down a layer of foam that will cling and penetrate into the part to provide superior cleaning performance - Quick evaporation technology leaves no residue and needs no rinsing - Biodegradable formula

- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air

Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware

A premium water bottle that provides secure, leak-free hydration with a great in-hand feel and lasting freshness. The Voda Water Bottle gives you clean, consistent, at-the-ready hydration on any ride. It's made from recyclable, FDA-approved materials free from BPA, BPS, and Phthalates. Plus, it has a PopTop cap that's easy to open but offers secure closure and leak-free transport. Product details - Redesigned bottle and cap feature all-new materials for great feel and consistent closure - Free of BPA, BPS, and phthalates - PopTop's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle, cap, and removable seal are dishwasher safe and 100% recyclable - Long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA

Carry just the necessities in Topeak's Medium Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.

Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included disc brake-compatible rear rack.

Topeak's tubular aluminum rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. So go ahead and bring your favorite little passenger or gear along for the ride.

Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.

Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Topeak's Dual-Touch Bike Stand is a great way to display and store your prize two-wheelers whether you park it in your living room, the garage or the office. It's built of durable and attractive aluminum, is capable of holding up to 4 bicycles with additional bike mounts (2 bike mounts included) and features a quick-release height adjustment (the stand reaches up to 10.5 feet).

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too. Plus, it comes with a spring that folds up to clamp securely onto books, magazines and other thin objects.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included